Vacuum Flask, Hiking bunny

• Item code: 1861
• EAN: 7090015491880
• Transport destination: 21 cm x 9 cm x 8 cm (LxBxH)
• Weight: 0.334000 kg
• Produksjonsland: Kina

The cap and drinking cup can be cleaned in the dishwasher. Avoid boiling and too high temperatures on the cap, as this can alter the shape of the parts. To take good care of the pattern on the outside the vacuum flask should not be put in the dishwasher. Cleaning the cap: The vacuum flask has a cap with a push-button that can be opened and twisted apart for cleaning. Directly after use the cap should be taken apart and the different parts should be soaked in water/rinsed with detergents (or baking powder, see below) to prevent the liquid leaving smells, tastes – or mould. When putting the cap back together, it is important to keep the parts in the right positions i relation to each other. If the parts are put together crookedly, the cap might leak. The baking powder trick: Many people actually recommend baking powder (!) to remove remains and to clean the parts and the thermos itself properly. You can for example put the different parts in a bowl of hot water mixed with baking powder, until you think it all looks sparkling clean (a few minutes). You can also pour a little baking powder into the vacuum flask, then some hot water, shake well, let it work for a few minutes. Remember to rinse well with clean water afterwards. Holds approximately 350 ml. Our vacuum flasks are made from stainless, recyclable steel, same material as is used in the steel pans you have in your kitchen. Stainless steel is known as a safe choice as it has no type of coating inside the vacuum flask. The caps are made from plastic. No traces of Phthalates or BPA have been found in the caps or cups. The vacuum flask has a double wall and base, and our test results show that hot liquid, which was 98 °C C when poured in, was just over 60 °C C after 7 hours.